CY Wire Gauze Packing / 100mm Ss Column Packing High Efficiency
Materials of Construction
The most common material used for Hualai structured column packing
is SS 304L and SS 316L. However Hualai manufactures this solely based on our customers’
requirements and can also be made from other materials based on
special requests. Other materials like Titanium, duplex 2205,
copper, etc. are also no problem with us.
Uniform Liquid Distribution
In order to achieve even liquid distribution over the packing it is
a must to have a good liquid distributor to maximize the
interaction of the liquid and vapor. However if the packing height
exceeds 3 meters we recommend using an intermediate liquid
re-distributor as well for even flow.
The mass transfer efficiency of wire mesh corrugated packing is directly determined by its specific surface area. According to
the specific surface area, it can be divided into 250, 500 and 700
types. As the corrugated metal mesh filler belongs to the type of
liquid membrane mass transfer, opening holes on corrugated filler
sheet or making double-layer wire mesh filler to strengthen the
uniform distribution of liquid on the corrugated wire mesh sheet,
especially in low spray density, whether to ensure the uniform
distribution of liquid on the wire mesh sheet is the key to
maintain high separation efficiency.
Hualai wire mesh structured packing products list (normal):
| Type | Specific Surface | Bulk Density | Void Ratio | obliquity | ΔP | Liquid spray density | Liquid holdup | Theo. Plate | HETP | F factor | Application② |
| (m2/m3) | (kg/m3) | (%) | Angle | (Pa/plate) | (m3/m2*h) | % | (piece/m) | mm | (m/s)*(kg/m3)0.5 | |
| 250(AX) | 250 | 45① | 98.5 | 30 | 10-40 | 0.2-12 | 2 | 2.5-3 | 100 | 2.5-3.5 | Precision distillation with few theoretical series |
| 500(BX) | 500 | 95① | 96.9 | 30 | 50 | 0.2-12 | 4.2 | 4-5 | 200 | 2.0-2.4 | Vacuum Distillation of Thermosensitive and Difficult Separation
Systems |
| 700(CY) | 700 | 130① | 95.6 | 45 | 67 | 0.2-12 | 6 | 8-10 | 333-400 | 1.5-2.0 | Isotopic mixture, isomeric mixture separation |
①The data are based on 0.12mm wire, stainless steel material.
Applicable temperature (-200—400)℃. 0.15mm and 0.17mm wire are also
available.
②Metal wire mesh corrugated packing is suitable for clean
gas-liquid system without solid particles or suspended solids or
not easy to self-assemble.
Benifits of Hualai structured packing:
Lower pressure drop through the column
■Lower botoms temperature for heat sensitive systems
■Higher relative volatility for difficult separations
■Lower energy consumption
■Reduced foaming tendency
Higher efficiency in the same tower height
■Large number of theoretical stages required
■Reduced reflux requirement
Higher capacity
■Reduced vessel diameter
■Increased operating rates
Excellent liquid spreading characteristics
■Improved efficiency
■Offshore applications subject to permanent tilt and motion
Reduced liquid hold-up
■Smaller amounts of polymer inhibitor
Projects applying wire mesh structured packing
- Ethyl trimethylacetoacetate was extracted and high vacuum
distillation was carried out with corrugated wire mesh packing.
- Purification of tert-butyl cresol early ether by vacuum
distillation in metal wire mesh packing column.
- Purification of tetrafluoroethylene monomer and substitution of
corrugated wire mesh packing for ceramic ring packing in
distillation.
- Butene-2 Separation with 700Y Metal Wire Mesh Corrugated Packing.
- Separation of n-alkanes with vacuum distillation using 700Y
corrugated wire mesh packing.
- Separation of synthetic fatty acids with vacuum distillation using
700Y corrugated wire mesh packing.
- Isopropanol Separation, Plate Tower Modified with 700Y Metal Wire
Mesh Corrugated Packing.
Welcome your inquiry about Hualai structured packing any time!
