Wire Mesh Vapor Liquid Separator Mist Eliminator Parts Austenitic
316Ti
316Ti is a kind of austenitic stainless steel, titanium is added to ss316 to improve the inter-granular corrosion
resistance.
| Stainless Steel | 316Ti |
| Feature | Strong resistance to intergranular corrosion |
| Application | Petrochemical industry, electromechanical hardware, ship, power
plant |
| Chemical Content | C | Si | Mn | P | S | Ni | Cr | Mo | Other |
| ≤0.08 | ≤1.00 | ≤2.00 | ≤0.45 | ≤0.030 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | ≥Ti5×C% |
Other material of construction
Mesh and grids may be made from most metals and plastics i.e.
SS304, 304L, 316, 316L, 321, 310S, 201, Duplex 2205, 904L, Alloy
20, Monel, Nickel, Copper, P.T.F.E., H.D.P.E., P.P., co-knit of
316L + PTFE, alloy 20 + PTFE, 304+PTFE, 904L + PTFE, 304+glass
fiber, 316L + glass fiber, 904L + glass fiber, 316L+PP etc. and
other metals, alloys or plastic which can be drawn or extruded.
Vapor liquid separator, Types & applications:
Wire mesh mist eliminator vapor liquid separator of various styles
and materials are available for all applications. By selecting the
style based on the application, the wire demister fully
demonstrates its performance matching the work conditions.
| Mesh Density kg/m3 | Wire Dia. Mm | Specific Area m2/m3 | Void Fraction % |
| Type 1 | 80 | 0.23 | 175 | 99 |
This type is for simple process or a process where the existence of
products becomes problematic. Examples for when this is used are
highly viscous liquid or liquid filled with solid particles, gas
containing small dust, very large water drops (10 microns or
larger) or large amounts of highly humid liquid.
Compared to other types, this wire demister provides higher gas
speed than the average at a low cost, although efficiency is
reduced to some extent. Normally, 150mm thick mesh pad is used.
| Mesh Density kg/m3 | Wire Dia. Mm | Specific Area m2/m3 | Void Fraction % |
| Type 2 | 144 | 0.23 | 316 | 98.2 |
This demister is most appropriate for general purposes. When data
such as the amount of flying and accompanying liquid and the size
of water drops are clear, the effect is excellent. The demister is
highly efficient even when, to a certain extent, the air flow is
changed. A 100mm thick demister is used for distillation tower,
evaporator and scrapper but the thickness can be increased to 150mm
for higher efficiency.
| Mesh Density kg/m3 | Wire Dia. Mm | Specific Area m2/m3 | Void Fraction % |
| Type 3 | 192 | 0.23 | 421 | 97.6 |
Though the demister is deemed the standard type because it is used
in many fields, this model is strong and highly efficient. The
demister is used in places where it is necessary to reduce
accompanying airborne droplets to a minimum.
The demister safely functions because the design adapts to changes
in gas or fluid flow rate. Generally, the 100mm mesh pad is used,
but the mesh pad of greater thickness is used where the flow rate
changes extensively, offering increased production.
| kg/m3 | Wire Dia. Mm | Specific Area m2/m3 | Void Fraction % |
| Type 4 | 216 | 0.23 | 474 | 97.3 |
It is appropriate for collecting very fine particles (1-3 micron)
and effective for evaporator, washing equipment, compressor and
absorption column, etc. Normally, 200mm to 300mm thickness mesh pad
is used.
Advantages in mesh pad demister:
Optimized solutions
Standard configurations
Tailored made configurations
Expedited services available
knowledge and engineering experience
High quality manufacturing standards and procedures
Manufactured in a variety of corrosion resistant materials (Metals,
Plastics and Co-knit mesh options)
Package & shipping of demister mist eliminator:
